Cisco Meraki
Wiacom integrates with Cisco Meraki MR wireless networks via the Meraki Dashboard cloud. Once connected, Wiacom configures your SSIDs, provisions guest credentials, and manages access — all from the Wiacom admin panel.What You Can Do
| Wiacom Product | What happens on Meraki |
|---|---|
| Guest Connect — Key Access | Guests receive your venue’s shared WiFi password by email after registering |
| WiFi Pass | Each guest receives a unique personal passphrase provisioned on the SSID |
| Portal | Guests are redirected to a Wiacom splash page before getting internet access |
Requirements
| Requirement | Detail |
|---|---|
| Meraki firmware | MR 29.4.1 or later |
| WiFi Pass firmware | MR 30.1 or later |
| API access | Dashboard API must be enabled on the organisation |
| API key permissions | Read + Write at organisation level |
| WiFi Pass hardware | Wi-Fi 5 Wave 2 or newer access points |
| Generation | Models |
|---|---|
| Wi-Fi 5 Wave 2 | MR20, MR30H, MR33, MR42, MR42E, MR52, MR53, MR53E, MR70, MR74, MR84 |
| Wi-Fi 6 | MR28, MR36, MR36H, MR44, MR46, MR46E, MR56, MR76, MR78, MR86, MR45, MR55 |
| Wi-Fi 6E | MR57, CW9162I, CW9164I, CW9166I |
Limitations
| Item | Limit |
|---|---|
| Identity PSKs per SSID (WiFi Pass) | Up to 5,000 (requires MR 30.1+) |
| SSIDs per Meraki network | Up to 15 |
| Portal + WiFi Pass on the same SSID | Not supported — use separate SSIDs |
| WiFi Pass credential expiry | Managed by Wiacom; Meraki has no native PSK expiry |
Next Steps
Setup Guide
Connect Meraki to Wiacom step by step
Key Access
Shared password delivery via Guest Connect
WiFi Pass
Per-user Identity PSK provisioning